|
DC-390U2B AND DC-390U2W SCSI Adapters are FLASH upgradeable. Use the Flash BIOS
upgrades available below.
The files you will need to program Flash BIOS are:
- TRMFLASH.EXE
- INT13U2.BIN (Available Below)
- Boot to a command prompt from either a DOS floppy
or by pressing [Shift] + [F5] when Windows 95 is starting. Change to the
directory or floppy disk containing the two files listed above.
- Type: TRMFLASH
- When the program starts, you'll be prompted to
select the Adapter to upgrade. Press [Enter].
- If you wish to save the old BIOS as a backup,
enter "Y" and the filename.
- Enter the filename to program: INT13U2.BIN
- Confirm the operation with "Y"
- Press [Esc] and reboot the system.
Linux, FreeBSD, Unix, Solaris and Netware Ham drivers are available on the
FTP site .
 |  | |
| Ver: | 3.26 | | Site: | Download | | Date: | 2003-5-16 | | Size: | 48KB | | Note: | For DC-390U2B/U2W | | Change: |  1. <BIOS>: It contains Flash ROM utility for BIOS upgrade. Make sure that your
BIOS ROM is a Flash ROM by checking the print "Flash ROM" on the
BIOS chip.
1.1. TRMFLASH.EXE
SUPPORT FLASH ROM MODEL:
==> ATMEL : AT29C512A,AT29C010A
==> SST : SST39SF010,SST39SF020A
==> SyncMOS : F29C51001T
==> WINBOND : W29C011A-15N,W29C020C-90BN
1.2. BIOS FILES:
1.2.1 INT13U2.BIN
SUPPORT MODEL:
==> DC-390U2B
==> DC-390U2W |
|  | |
| Ver: | 3.23A | | Site: | Download | | Date: | 2001-4-16 | | Size: | 845KB | | Note: | For DC390U/F/U2B/U2W | | Change: | 1. <DOS>: It contains ASPI drivers and utilities for DC-390U2B/U2W
1.1. ASPIUWF.SYS : ASPI driver for DC-390U2B/U2W
1.2. TRMDISK.SYS : ASPI driver for HDD and removable media devices
1.3. TRMCD.SYS : CD-ROM driver (add "/s2" switch, if your CD-ROM is
a SCSI-2 device)
1.4. INSTALL.EXE : This is a DOS driver installtion utility that helps
you install the device drivers for HDD, removable
media, CD-ROM, and tape by auto-updating the
CONFIG.SYS and AUTOEXEC.BAT files.
1.5. UTIL.EXE : Setup utility for you to change the options for
adapter/SCSI_devices without re-booting the system
and pressing <F2> key
1.6. TFDISK.EXE : DOS compatible disk partition utility
2. <NETWARE>: It contains drivers for Netware v3.11/v3.12/SFT-III/4.x/5.x
2.1. DC390UWF.DDI: DDI driver.
2.2. DC390UWF.HAM: HAM driver.
3. <WINNT>: Contains drivers for
Windows NT v3.51/4.x in <WINNT\3_51-4_x>
Windows 2000 in <WIN2000>
Windows ASPI in <WINASPI>
3.1. OEMSETUP.INF : Setup Information File
3.2. TRM390W.SYS : SCSI Driver
3.3. TXTSETUP.OEM : Setup Text File (in root directory)
3.4. DCSCSI : Text Setup Tag File (in root directory)
4. <OS2DRV>: Contains 4 files under the \OS2DRV directory of this driver
diskette and is for OS/2 versions 2.0/2.1/2.11/WARP 3.0 & 4.0
4.1. TMSCSIM.EXE: Execution file for DDINSTAL
4.2. TMSCSIM.ADD: SCSI Device Driver
4.3. TMSCSIM.DDP: SCSI Device Driver Profile
5. <WIN95_98>: Contains drivers for Windows 95 & 98 & 98SE
There are two driver files under the \WIN95_98 directory of the driver
diskette:
5.1. TRM390W.MPD
5.2. TRM390W.INF
6. <BIOS>: It contains Flash ROM utility for BIOS upgrade. Make sure that your
BIOS ROM is a Flash ROM by checking the print "Flash ROM" on the
BIOS chip.
6.1. TRMFLASH.EXE : Flash SCSI BIOS Tool
6.2. INT13U2.BIN : for DC-390U2B & DC-390U2W
6.3. INT13F.BIN : for DC-390U/F |
|
Copyright © 2004 Tekram Systems. All rights reserved. |
Best viewed with 800x600 resolution |
|
External RAID subsystem